These pits should be avoided during bearing maintenance:

In order to better maintain the original characteristics of the bearing for a long time, maintenance and repair must be carried out to avoid safety accidents, ensure the reliability of the operation, and improve the production efficiency and rationality. The actual level of maintenance is very good compared to the actual operating standards for mechanical equipment. It includes checking the actual operation standard, filling or changing the lubricating grease, and dismantling on time. As a new maintenance item in operation, it includes bearing rotating noise, vibration, temperature, lubrication standard, etc. Other information related to these aspects.

Generally, bearings can be applied to their fatigue life if properly applied. However, it can fail prematurely and cannot tolerate application conditions. This initial damage limits the quality of the application compared to the fatigue life and is referred to as a common failure or safety accident. Many problems caused by installation, use and lubrication do not require attention to the ingress of external dirt. Insufficient scientific research on the thermo-electric effects of shafts and bushings.

For the damage of the bearing, such as the damage of the roller bearing flange, in consideration of the reasons, insufficient lubricating grease, unsuitable gas structure defects, intrusion, incorrect bearing, great music of the bearing, the reasons will overlap.

Therefore, only by investigating the bearing damage can the true cause of the damage be understood. However, if you understand the application standard, application standard and structure around the bearing of the bearing mechanical equipment, master the situation before and after the safety accident, and combine the cause and inspection of the bearing damage, you can avoid the recurrence of similar safety accidents.